Escape AWD V6-3.0L VIN 1 (2004)
Control Arm: Service and Repair
Rear
Lower
Lower Arm
Removal and Installation
1. Remove the wheel and tire.
NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.
2. Separate the lower ball joint from the knuckle.
^
Remove the lower ball joint nut.
3. Remove the lower arm.
1. Remove the lower arm inner bolt.
2. Remove the lower arm.
4. To install, reverse the removal procedure
Upper
Upper Arm
Removal and Installation
1. Remove the wheel and tire.
NOTE: It may be necessary to hold the ball joint stud to keep it from turning while removing the nut.