Escape AWD V6-3.0L VIN 1 (2004)
If an overfill condition occurs, excess fluid should be removed by a qualified technician.
Fluid Condition Check
NOTE: Evidence of fluid contamination, breakdown, or incorrect fluid can cause poor shift quality. If the transmission fluid condition is suspect,
drain the transaxle and replace the fluid with MERCON(R) V Automatic Transmission Fluid XT-5-QM or equivalent meeting MERCON(R) V
specification.
^
Make the normal fluid level check as described in, Fluid Level Check.
^
Observe the color and odor of the fluid. It should be red, not brown or black. Odor can indicate an overheating condition or clutch disc or band
failure.
^
Use a clean, lint-free cloth and wipe the fluid level indicator. Examine the stain for evidence of solid particles and signs of antifreeze (gum or
varnish on the fluid level indicator).
If particles are present in the fluid or there is evidence of contamination, the transaxle drain plug should be removed and a sample of the fluid filtered
through a paper filter and examined. If transaxle failure is confirmed by further evidence of coolant or excessive particles in the fluid, the transaxle
must be completely cleaned and repaired. This includes cleaning and flushing the torque converter and transaxle cooling system. During disassembly
and assembly all overhaul checks and adjustments of clearances and end play must be made. After repairing the transaxle, all diagnostic tests and
adjustments listed must be completed to make sure that the problem has been eliminated.
