ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Bumper Assembly - Rear (4-Door Variant) - Remove And Install (43 443 0) > < Mirror - Door (Powered) (One) - Remove And Install (43 364 0)
Bumper Assembly - Front - Remove And Install (43 423 0)Escort/Orion 1991 (08/1990-09/2001)
Print Print
Removal and Installation
Remove
1. Raise and support the vehicle.

2. Remove the fender splash shield extensions (both sides).

3. Remove the splash shield.
• Remove the retaining bolts.
• Remove the rivets.

4. Remove the bumper retaining screws from the left and right‐hand wheelhouse.

CAUTION:

When disconnecting the multiplug do not pull on the wiring; pull on the multiplug body.

5. Disconnect the multiplugs on the bumper mounted lamps.

6. Remove the bumper retaining nuts (four nuts).

7. Remove the bumper assembly.
Install
8. Refit the components in reverse order.

Bumper Assembly - Rear (4-Door Variant) - Remove And Install (43 443 0) > < Mirror - Door (Powered) (One) - Remove And Install (43 364 0)