ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins for Timing Belt: > < Camshaft Gear/Sprocket|Service and Repair
Page 1
background image

Timing Belt: Customer Interest
Timing Belt - Squeal or Whine After Cold Start

Article No. 
94-16-12

08/10/94

^

ENGINE - 1.8L DOHC - "SQUEAL" OR "WHINE" NOISE FROM TIMING BELT TENSIONER AFTER COLD START - VEHICLES BUILT
BEFORE 1/1/94

^

NOISE - "SQUEAL" OR "WHINE" FROM TIMING BELT TENSIONER AFTER COLD START - VEHICLES WITH 1.8L DOHC ENGINE
BUILT BEFORE 1/1/94

FORD:
1991-94 ESCORT

LINCOLN-MERCURY: 
1991-94 TRACER

ISSUE:
A "squeal" or "whine" noise may be heard around the timing belt after a cold start. This is caused by a decrease in the clearance of the tensioner bearing
when cold conditions exist or tightening of the tensioner bolt.

ACTION:
Replace the timing belt tensioner with a revised, more rigid assembly. The bottom thickness of the tensioner has been increased from 5 mm to 8 mm to
increase rigidity and the radial clearance of the tensioner bearing has also been increased. Refer to the following procedure for service details.

1.

Verify the noise concern.

2.

If a "squeal" or "whine" is heard, install a revised timing belt tensioner (F1CZ-6K254-A). Refer to the appropriate Escort/Tracer Service Manual,
Section 03-03A, for the removal and installation procedures.

NOTE:

IT IS NOT NECESSARY TO REPLACE THE IDLER PULLEY.

PART NUMBER

PART NAME

CLASS

F1CZ-6K254-A

Timing Belt Tensioner

CG

OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage For 1992-94 Models, Basic Warranty Coverage For 1991 Models

OPERATION DESCRIPTION

TIME

941612A

Replace Timing Belt

1.3 Hrs.

Tensioner

DEALER CODING 

BASIC PART NO.

CONDITION CODE

6K254

55

OASIS CODES: 497000, 702000

All Technical Service Bulletins for Timing Belt: > < Camshaft Gear/Sprocket|Service and Repair