ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Intake Air Temperature Sensor > < Electrical Specifications|Page 2086
Page 1
background image

Air Flow Meter/Sensor: Service and Repair

REMOVAL

1. Disconnect negative battery cable.

NOTE:  When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control
module relearns its adaptive strategy. The vehicle may need to be driven 10 miles or more to relearn the adaptive strategy.

2. Disconnect resonance chamber from meter. Position chamber and air duct clear of work area.

Volume Air Flow (VAF) Meter

3. Disconnect meter electrical connector.

4. Remove ignition coil wire routing bracket. 

Volume Air Flow Meter

5. Remove meter mounting nuts and lift off meter and gasket.

INSTALLATION

1. Install gasket and position meter. Install mounting nuts.

2. Install coil wire routing bracket and mounting nut.

3. Connect meter electrical connector.

4. Connect resonance chamber to meter.

5. Connect negative battery cable.

Intake Air Temperature Sensor > < Electrical Specifications|Page 2086