ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Computers and Control Systems > < Part 1 of 3|Page 2225
Page 2
background image

1. Place PCM into its mounting position.
2. Install mounting bolts and nut.
3. Plug in PCM electrical connectors.
4. Position fuel pump relay and install bracket attaching nut.
5. Install ventilation duct.
6. Install trim panels on floor console under instrument panel.
7. Connect negative battery cable.

Sensors and Switches - Computers and Control Systems > < Part 1 of 3|Page 2225