ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Fuel Injector > < Fuel Pressure Release|Service Precautions
Page 1
background image

Fuel Pressure Release: Service and Repair

WARNING:  Do not smoke, carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly
flammable mixtures are always present and may be ignited, resulting in possible personal injury.

 

CAUTION:  Fuel supply lines will remain pressurized for long periods of time after engine shut down. This pressure must be relieved before
servicing of the fuel system is begun. A valve is provided on the throttle body for this purpose. Remove the air cleaner and relieve system
pressure by using Rotunda pressure gauge tool T80L-9974-A or equivalent and drain the system through the drain tube.

Before servicing or disconnecting any fuel tubes or components, relieve the fuel pressure as follows:

1. Remove the rear seat cushion.
2. Start the engine.
3. Disconnect the fuel pump electrical connectors.
4. Wait for the engine to stall, then turn off the ignition switch.
5. Connect the fuel pump connectors.
6. Install the rear seat cushion.

Fuel Injector > < Fuel Pressure Release|Service Precautions