Escort L4-110 1.8L DOHC (1994)
Wiring Harness Connector
6. Disconnect fuel injector wiring harness connectors.
7. Remove fuel rail mounting bolts and fuel rail.
8. Remove fuel injectors,grommets, and insulators.
INSTALLATION
1. Lubricate new O-rings with clean engine oil and install them on fuel injectors.
2. Install injectors, grommets, and insulators onto fuel rail.
3. Place fuel rail into mounting position.
4. Install fuel rail mounting bolts and tighten to 19 - 25 Nm (14 - 19 ft lb).
5. Plug in injector wiring harness electrical connectors.
6. Connect vacuum hose to pressure regulator.
7. Connect PCV hose to intake plenum and cylinder head cover.
8. Connect fuel line spring lock couplings.
9. Connect negative battery cable.
10. Start engine and check for fuel leaks.
