ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2843 > < Throttle Cable/Linkage|Specifications|Page 2840
Page 1
background image

Throttle Cable/Linkage: Initial Inspection and Diagnostic Overview

Accelerator Pedal And Linkage

^

Verify the condition by operating the accelerator pedal and shaft (9725) from idle to wide open throttle and back again. Check for any
resistance in forward travel of the accelerator pedal and shaft or hesitation on return.

^

If a condition exists, visually inspect all components of the accelerator pedal and shaft and linkage. Look for damage or binding of the
accelerator cable (9A758). Also, look for obstructions at the throttle body (9E926) and accelerator pedal and shaft.

NOTE: For vehicles equipped with speed control, also examine the speed control actuator. Refer to Speed Control/ Adjustments.

Initial Inspection and Diagnostic Overview|Page 2843 > < Throttle Cable/Linkage|Specifications|Page 2840