Escort L4-110 1.8L DOHC (1994)
Crankshaft Position Sensor: Description and Operation
Fig. 7 Crankshaft position sensor. 1.3L/4-80.8 & 1.8L/4-109 engines
PURPOSE
The Crankshaft Position (CKP) sensor provides crankshaft position and rotation speed input to the Powertrain Control Module (PCM).
OPERATION
A disc with 4 equally spaced slots rotates with the distributor shaft passing through a fixed photo sensor. This signals the PCM crankshaft position
at 90° intervals. The PCM uses this signal to modify air/fuel ratio, idle speed, injector timing, ignition timing, purge flow, A/C cutoff and air inlet
control.
