Escort L4-110 1.8L DOHC (1994)
Front Steering Knuckle: Service and Repair
Steering Knuckle Assembly Installation
Front Hub/Steering Knuckle Assembly Installation
1. Install the front hub/steering knuckle assembly onto the ball-joint and secure it with the nut and bolt. Tighten the nut to 43-59 N.m (32-43
lb-ft). Apply Loctite 290 or equivalent thread locking compound to the nut and bolt threads.
2. Install the outer tie rod. Refer to Manual Steering. See: Steering
3. Install the steering knuckle to the shock/strut assembly. Tighten the nuts and bolts to 93-127 N.m (69-93 lb-ft).
4. Install a new locknut securing the halfshaft to the front hub. Tighten the locknuts to 235-319 N.m (174-235 lb-ft). Stake the locknut to prevent
it from loosening.
5. Install the brake rotor, caliper and wheel. Refer to Disc Brakes.
