ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Manual Lever Position Switch (ATX)|Page 3255 > < Manual Lever Position Switch (ATX)|Page 3253
Page 1
background image

Transmission Position Switch/Sensor: Service and Repair

REMOVAL

1.

Disconnect the battery ground cable.

2.

Remove the air cleaner outlet tube.

3.

Remove the manual control lever nut securing the park actuator support to the manual control lever.

4.

Remove the park actuator support from the manual control lever.

Transmission Range Switch Electrical Connectors

Manual Lever Position (MLP) Switch Connector

5.

Disconnect the three electrical connectors located on the top of the transaxle.

6.

Disconnect the electrical connector located on the front side of the transaxle.

Manual Lever Position Switch (ATX)|Page 3255 > < Manual Lever Position Switch (ATX)|Page 3253