Escort L4-116 1.9L SOHC (1991)
Air Dam: Customer Interest
Body - Front Valance Panel Missing or Loose
Article No.
94-11-2
06/01/94
BODY - FRONT VALANCE PANEL MISSING OR LOOSE - VEHICLES WITH 1.9L ENGINES AND ATX TRANSAXLES AND ALL 1.8L GT
MODELS
FORD:
1991-94 ESCORT
LINCOLN-MERCURY:
1991-94 TRACER
ISSUE:
Front valance panels on some vehicles may become loose or fall off in service. This may be caused by the production attachment bolts "pulling-through"
the valance panel.
ACTION:
Use new, longer bolts with a larger free-spinning washer to attach the front valance panel. The improved bolts will not pull through the panel. Refer to
the following procedure for service details.
1.
Remove the three (3) existing front valance panel attaching bolts, and remove the valance panel, Figure 1.
2.
Inspect the valance panel for damage at the attaching holes. Replace the valance panel (F1CZ-17626-A), if required.
3.
Line up the valance panel to body attaching holes, and install three new bolts (FOCZ-10N768-A).
4.
Tighten the attaching bolts to 6.6-9.0 N-m (58-79 lb.in.).
PART NUMBER
PART NAME
CLASS
FOCZ-10N768-A
Front Valence Attachment Bolt
C
F1CZ-17626-A
Front Valence Panel Assembly
B
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS:
Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage For 1992/94 Models, Basic Warranty Coverage For All Other Models
OPERATION DESCRIPTION
TIME
941102A
Reattach Or Replace Front
0.3 Hr.