ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Seat Belt Retractor Limit Switch > < Front Lap Belt Retractor|Page 5780
Page 2
background image

6. Remove the rear shoulder belt anchor mounting bolt and remove the assembly.

INSTALLATION 

1. Place the rear shoulder belt anchor into its mounting position and install the anchor mounting bolt. Tighten the bolt to 38-78 Nm (28-58 ft lbs).
2. Place the rear seat cushion into its original position.
3. Place the rear shoulder belt guide into its mounting position and install the belt guide mounting bolt. Tighten the bolt to 38-78 Nm (28-58 ft lbs).
4. Place the rear shoulder belt retractor into its mounting position and install the retractor mounting bolt. Tighten the bolt to 38-78 Nm (28-58 ft lbs).
5. Install the trunk side trim panel.
6. Install the speaker and grille assembly.

Seat Belt Retractor Limit Switch > < Front Lap Belt Retractor|Page 5780