Escort L4-116 1.9L SOHC (1991)
23. Apply automatic transaxle fluid to the new O-rings and install them onto the oil pipe assembly. Install the oil pipe assembly.
24. Apply automatic transaxle fluid to a new (A) O-ring and install it onto the filter. Install the filter.
Disassembly
NOTE: Each valve should slide in and out of its bore under its own weight. When a valve will not slide out under its own weight, depending on the
valve, push it out with a wire or place the valve body open-side down and lightly tap it with a soft hammer. Never scratch or damage a valve bore. Do
not drop the valves or use a valve that has been damaged. Before assembling the valve body, be certain that all valves are clean and lubricated with
automatic transaxle fluid.
1. Remove the (A) stop pin, (B) stop plug, (C) bypass valve, and the (D) bypass valve spring.
