Escort L4-116 1.9L SOHC (1991)
Clutch Master Cylinder: Service and Repair
REMOVAL
1. Remove battery and battery tray assembly.
2. Disconnect clutch pressure line from master cylinder.
3. Using needle nose locking pliers, or equivalent, clamp off brake fluid feed line to clutch master cylinder.
4. Disengage clamp, then remove brake fluid feed hose from clutch master cylinder.
5. From inside vehicle, remove master cylinder retaining nut.
6. From inside engine compartment, remove master cylinder retaining nut, then master cylinder.
INSTALLATION
1. Align clutch pedal push rod, then install master cylinder. Torque retaining nuts to 14-19 ft lb.
2. Connect master cylinder pressure line, then torque pressure line retaining nut to 10-16 ft lb.
3. Install hose and clamp assembly, then battery and tray.
4. Bleed air from system.