Escort L4-116 1.9L SOHC HO (1989)
Attachment II - Labor and Parts Information
LABOR ALLOWANCE
Replace the Exhaust System Catalyst. Attach an Authorized Modifications Label. Prepare and Return the Removed Catalyst. (Time included to prepare
removed catalyst for return).
0.7 Hrs. - insert in Box "B" on Form 1864
Note:
Add 0.1 Hour Administrative Allowance to the total repair time.
PARTS REQUIREMENTS
Parts will not be direct shipped for this recall. Order your parts requirements through normal order processing channels.
Part prices are current until the next issue of the Master Price Book. For the latest price(s), call an Order Processing Center or check an updated Master
Price Book or DOES II.
REMOVED CATALYSTS
Removed catalysts must be returned. Prepare catalysts by removing excess weight. Cut and discard pipes/flanges as close to the catalyst shell as possible.
An FPS-700 Parts Disposition Tag will be issued to recall the removed catalysts. Return of removed catalysts with the FPS-700 tag attached must be
shipped prepaid freight via United Parcel Service (UPS) to the address on the reverse side of the tag.
Refer to the part return shipping procedure in Section 7.0 of the Warranty and Polity manual.
ANY QUESTIONS FOR THE HANDLING OF SPECIAL SITUATIONS REGARDING REMOVED CATALYSTS SHOULD BE RESOLVED
WITH YOUR SERVICE ZONE MANAGER.
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
EMISSIONS CONTROL SYSTEM MODIFICATIONS INSTALLATION INSTRUCTIONS
AFFECTED VEHICLES:
1989, 1990 Model Escort - Federal and Canadian 1.9L-CFI Engines with Calibration codes 8-07A-R11, 8-07F-R11 and 8-08A-R11
Catalytic Converter
