Ford Workshop Service and Repair Manuals

Fuel Injector: Service and Repair
Fuel Injector Harness

REMOVAL

NOTE:  Ensure ignition switch is in OFF position.
 1.

Disconnect electrical connectors from four fuel injectors.

 2.

Disconnect connectors from main wiring harness, ECT sensor, and Throttle Position Sensor.

 3.

Remove wiring assembly.

INSTALLATION

 1.

Position wiring harness along side of fuel injectors.

 2.

Snap electrical connectors into position on four injectors.

 3.

Connect throttle position sensor, ECT sensor and main harness connectors.

 4.

Verify that all electrical connectors are firmly seated.