ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Central Fuel Injection - CFI|Page 3644 > < Central Fuel Injection - CFI|Page 3642
Page 1
background image

Fuel Supply Line: Description and Operation
Electronic Fuel Injection - EFI

FUEL LINES AND CONNECTORS

Hair Pin Clip

Duck Bill Clip

NYLON PUSH CONNECT FITTINGS

Nylon push connect fittings are designed with two different retaining clips. The "hairpin" clip is used on 5/16 inch (7.9mm) diameter tubing. The
"duckbill" clip is used on 1/4 & 1/2 inch (6.35 & 12.7mm) diameter tubing.

Push Connect Fittings

SPRING LOCK COUPLING

The spring lock coupling is a fuel line coupling held together by a garter spring inside a circular cage. When the coupling is connected together, the
flared end of the female fitting slips behind the garter spring inside the cage of the male fitting. The garter spring and cage then prevent the flared end of
the female fitting from pulling out of the cage. As a redundant locking feature, a horseshoe shaped retaining clip is incorporated to improve the retaining
reliability of the spring lock.

FUEL FILLER NECK (FILL PIPE RESTRICTOR)

Fuel Filler

To prevent accidental filling with other than unleaded fuel, vehicles that require unleaded fuel have a special filler tube. This filler tube has a restriction
in it so that the only nozzles that can be inserted are the smaller diameter nozzles of pumps dispensing unleaded fuel.

Central Fuel Injection - CFI|Page 3644 > < Central Fuel Injection - CFI|Page 3642