ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - No Start Condition/Bucking Condition|Page 3778 > < Engine - No Start Condition/Bucking Condition|Page 3776
Page 1
background image

Intake Air Duct: Description and Operation

Air Induction System

The air induction system provides clean air to the throttle body. Outside air enters from an opening in the fender through the air cleaner inlet tube and
then into the air cleaner assembly, where it is filtered through the air filter. From the air cleaner assembly it travels through the air cleaner outlet tube and
into the throttle body. The PCV system is also supplied clean air from a filter pack located inside the air cleaner tray. Air induction noise is effectively
reduced by means of a sealed and tuned resonator chamber located in the air cleaner cover assembly and a secondary tuned venturi section in the inlet
tube.

A vacuum operated pre-heat system is included to provide heated intake air during cold engine operation. A temperature sensor controls a door in the air

Engine - No Start Condition/Bucking Condition|Page 3778 > < Engine - No Start Condition/Bucking Condition|Page 3776