Escort L4-116 1.9L SOHC HO (1989)
43.
Connect idle air by-pass valve connector.
44.
Remove radiator sight shield.
45.
Remove old Vehicle Emission Control Information (VECI) decal from sight shield.
46.
Clean residue from old VECI decal from sight shield using Metal Brake Parts Cleaner E6AZ-19579-BA or equivalent.
47.
Apply new VECI decal and Authorized Modifications decal onto sight shield. (Fig. 8)
CAUTION:
Apply VECI decal E8AE-9C485-AJZ to 1988 vehicles. Apply VECI decal E9AE-9C485-BLB to 1989 vehicles.
48.
Install sight shield onto radiator support.
49.
Start engine and warm to normal operating temperature.
50.
Adjust base ignition timing to 6~BTDC. Refer to VECI decal for procedure.
51.
Check idle speed. If necessary, adjust idle speed to 950 rpm. Refer to Section 4 of the 1988 Engine/Emissions Diagnosis Manual.
Vehicle Emission Control Information (VECI) Decals
