Escort L4-116 1.9L SOHC HO (1989)
4. Align sprocket holes in drive belt with sprocket teeth.
5. Engage track locator on switch bracket into slot in A-pillar. Attach A-pillar track switch bracket to A-pillar and track assembly.
6. Install limit switch.
7. Return belt anchor to position at B-pillar.
8. Pull webbing out of retractor at console. Allow belt webbing to lay flat on seat with no twist.
9. Locate and align anchor notch and install retaining bolt.
10. Install belt attaching shoulder belt. Tighten screw to 30-43 Nm (22-32 lb-ft).
NOTE: Use new screw N804772-S190 following any service done to shoulder harness.
