Escort L4-116 1.9L SOHC HO (1989)
Figure 2
3. Install the reworked weatherstrip/moulding by performing the operations shown in Figure 2.
a. Prime the painted sheet metal of the body opening surrounding the windshield with ESB-M2G234-A contained in the kit.
b. Install a new foam dam. Use foam tape E4AZ-19627-C.
c. Flood the area of the body opening around the entire perimeter of the opening with urethane adhesive ESB-M2G246-A contained in the kit.
d. Install the reworked weatherstrip/moulding around the windshield.
NOTE: AFTER RE-INSTALLATION OF THE WEATHERSTRIP/MOULDING, THE URETHANE REQUIRES AT LEAST 24 HOURS TO CURE
AT 40~ F (5~ C) OR ABOVE.
PART NUMBER
PART NAME
CLASS
E9FZ-5803110-A
Windshield
C
Weatherstrip/Moulding
E9FZ- 19562-A
Weatherstrip/Moulding
B
Adhesive - Kit
E4AZ-19627-C
Foam Tape
C
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:
Eligible Under Basic Warranty Coverage
OPERATION DESCRIPTION
TIME
900704A
Install New
1.1 Hrs.
Weatherstrip/Moulding Assembly
DEALER CODING
BASIC PART NO. CONDITION CODE
7003110
33
OASIS CODES:
1050, 1052, 1300
