Recall - Emission Systems Modifications for Vacuum Delay Valve
11.
Install 2-inch hose between choke pull-down fitting and existing vacuum hose (Figure 3).
12.
Install power steering reservoir filler neck extension.
13.
Install air cleaner.
14.
Disconnect vacuum hose from the air control side of combination air control and bypass valve. Remove vacuum delay valve from hose and
reconnect hose to air control and bypass valve (Figure 4).
15.
Disconnect vacuum hose at distributor vacuum advance. Install Green/Black vacuum delay valve and hose assembly (Figure 5).
NOTE:
Green side of valve goes toward distributor.
