ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

EGR Valve - Pinpoint Test Manual Correction|Page 2953 > < EGR Valve - Pinpoint Test Manual Correction|Page 2951
Page 20
background image

9.

Reconnect the idle air bypass valve electrical connector.

10.

Unplug and reconnect the EGR vacuum supply hose.

11.

The EGR is OK, REPLACE EVP sensor if the Continuous Code 32 was present.  If the Continuous Code 32 was not present, refer to the
Diagnostic Routines in Section 2.

Quick Test:Continuous Self-Test - 6.0

1988

EEC-IV - Quick Test - All Engines

16-15

QUICK TEST:

Continuous

Self-Test 

6.0

EGR Valve - Pinpoint Test Manual Correction|Page 2953 > < EGR Valve - Pinpoint Test Manual Correction|Page 2951