ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Bleeding - System|Page 4659 > < Bleeding - System|Page 4657
Page 12
background image

3. CAUTION:  Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.

Loosen the rear disc brake caliper bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake pedal
while tightening the rear disc brake caliper bleeder screw.
^

Repeat until clear, bubble-free fluid comes out.

4. Tighten the rear disc brake caliper bleeder screw.

Manual Bleed - Wheel Cylinder Only

Manual Bleed - Wheel Cylinder Only 

1. Attach a rubber drain hose to the wheel cylinder bleeder screw and submerge the free end of the hose in a container partially filled with clean 

brake fluid.

2. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.

3. CAUTION:  Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.

Loosen the wheel cylinder bleeder screw until a stream of brake fluid comes out. Have an assistant maintain pressure on the brake pedal while
tightening the wheel cylinder bleeder screw.
^

Repeat until clear, bubble-free fluid flows.

Bleeding - System|Page 4659 > < Bleeding - System|Page 4657