ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Pedal Assy|Specifications|Page 4668 > < Brake Pedal Assy|Specifications|Page 4666
Page 3
background image

10. Remove the clevis pin.

11. Remove the four power brake booster nuts.

12. If equipped with M/T, disconnect clutch pedal components.

1

Disconnect Clutch Pedal Position (CPP) switch electrical connector.

2

Remove clutch pedal push rod.

13. Remove the two brake pedal bracket nuts from the LH side.
14. Remove the brake pedal and bracket.

Installation 

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy.
The vehicle may need to be driven 16 km (10 miles) or more to relearn its strategy.

Brake Pedal Assy|Specifications|Page 4668 > < Brake Pedal Assy|Specifications|Page 4666