ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Bleeding - System|Page 4776 > < Bleeding - System|Page 4774
Page 6
background image

3. Loosen the RH rear bleeder screw until clear, bubble-free brake fluid flows. Have an assistant maintain pressure on the brake pedal while

tightening the bleeder screw.

4. Tighten the wheel cylinder bleeder screw.

5. If equipped with rear disc brakes, attach a rubber drain hose to the RH rear disc brake caliper bleeder screw and submerge the free end of the hose

in a container partially filled with clean brake fluid.

6. Have an assistant pump the brake pedal ten times and then hold firm pressure on the brake pedal.

7. Loosen the RH rear disc brake caliper bleeder screw until clean, bubble-free brake fluid flows. Have an assistant maintain pressure on the brake

pedal while tightening the bleeder screw.

Bleeding - System|Page 4776 > < Bleeding - System|Page 4774