ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brake Master Cylinder|Removal and Installation|Page 4832 > < Brake Master Cylinder|Removal and Installation|Page 4830
Page 1
background image

Brake Master Cylinder: Service and Repair
Disassembly and Assembly

Disassembly 

WARNING:  Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
 

1. NOTE:  ABS master cylinder shown, non-ABS similar.

Remove the brake master cylinder.

2. Clean the outside of the brake master cylinder.

3. Support the brake master cylinder body in a vice.

4. Remove the reservoir cap.
5. Use a suitable suction device to drain the brake master cylinder reservoir.

6. Carefully pry up on the brake master cylinder reservoir to remove.

Brake Master Cylinder|Removal and Installation|Page 4832 > < Brake Master Cylinder|Removal and Installation|Page 4830