Escort L4-121 2.0L SOHC VIN P SFI (2002)
4. Install the snap ring.
1
Depress the primary piston.
2
Install the snap ring.
5. If equipped, install the two brake pressure control valves.
6. Install the brake master cylinder reservoir.
1
Lubricate the grommets with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification
ESA-M6C25-A, DOT 3 and insert the grommets into the brake master cylinder.
2
Press the brake master cylinder reservoir into the grommets until it snaps in securely.
3
Fill the brake master cylinder with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification
ESA-M6C25-A, DOT 3.
7. Install the reservoir cap.
8. Install master cylinder.
