Escort L4-121 2.0L SOHC VIN P SFI (2002)
4. Remove the inner engine front cover.
5. Use Oil Seal Remover to remove the camshaft front seal.
Installation
1. Apply a thin film of clean engine oil to the lip of the camshaft front seal.
2. NOTE: The seal depth should be 0.05 - 1.0 mm (0.002 - 0.04 inch) below flush with the cylinder head front face.
Use Camshaft Oil Seal Installer to install the camshaft front seal.
3. Install the inner engine front cover.