Escort L4-121 2.0L SOHC VIN P SFI (2002)
2. Tighten the rear disc brake caliper bleeder screw.
3. Fill the brake master cylinder reservoir with High, Performance DOT 3 Fluid C6AZ-19542-AB or equivalent meeting Ford specification
ESA-MK25-A, DOT 3.
Gravity Bleed - Wheel Cylinder Only
Gravity Bleed - Wheel Cylinder Only
1. CAUTION: Be sure to check the brake fluid level in the brake master cylinder reservoir often. Do not let it run dry.
Loosen the wheel cylinder bleeder screw and leave open until clear bubble-free brake fluid flows.
2. Tighten the wheel cylinder bleeder screw.
3. Fill the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification
ESA-M6C25-A, DOT 3.
Manual Bleed - Front Disc Brake Caliper Only
Manual Bleed - Front Disc Brake Caliper Only
1. Attach a rubber drain hose to the front disc brake caliper bleeder screw and submerge the free end of the hose in a container partially filled with
clean brake fluid.
2. Have an assistant pump the brake pedal 10 times and then hold firm pressure on the brake pedal.