ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Throttle Cable/Linkage|Cable|Page 3890 > < General Specifications|Page 3887
Page 1
background image

Throttle Cable/Linkage: Service and Repair
Cable

REMOVAL

1. Disconnect the accelerator cable from the throttle control lever and the accelerator cable bracket.

1

Disconnect the cable housing from the accelerator cable bracket.

2

Disconnect the accelerator cable end from the throttle control lever.

3

Position the accelerator cable aside.

2. Remove the accelerator cable retaining clips.

3. Remove the (A) bolts and lower the (B) accelerator pedal and shaft.

4. Disconnect the accelerator cable from the accelerator pedal and shaft.

Throttle Cable/Linkage|Cable|Page 3890 > < General Specifications|Page 3887