ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Sensors and Switches - Transmission and Drivetrain > < Transmission Mode Indicator - A/T|Adjustments
Page 1
background image

Transmission Mode Indicator - A/T: Service and Repair

Bezel - Transmission Control Selector Dial 

Removal 

1. Remove the knob.
2. Remove the floor console.

3. Remove the screws from the transmission control selector dial bezel.

4. Disconnect the indicator lamp socket and remove the bezel.

Installation 

1. NOTE:  Adjust the transmission control selector dial bezel and then tighten th6 screws in the sequence shown.

To install, reverse the removal procedure.

Sensors and Switches - Transmission and Drivetrain > < Transmission Mode Indicator - A/T|Adjustments