ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag System Reconnect Checklist|Page 6126 > < Air Bag System Reconnect Checklist|Page 6124
Page 2
background image

batteries and power supplies (if equipped).

Disconnect the battery ground cable (14301) and wait at least one minute.

7. Remove the two steering wheel back cover plugs.

 

8. Remove the two driver air bag module retaining bolts (one shown).

 

9. Remove the driver air bag module. 

1. Disconnect the driver air bag module.
2. Disconnect the driver air bag module electrical connector retainer.
3. Disconnect the driver air bag module electrical connector.

 

10. Remove the driver air bag module.

 

11. Attach the restraint system diagnostic tool 501-031 to the clockspring electrical connector at the top of the steering column.
12. Open the glove compartment, push in on the two tabs and open the glove compartment door to its fullest downward position.

 

Air Bag System Reconnect Checklist|Page 6126 > < Air Bag System Reconnect Checklist|Page 6124