Escort L4-121 2.0L SOHC VIN P SFI (2002)
Brake Pedal Position Switch: Adjustments
1. Disconnect the battery ground cable.
2. Disconnect the Brake Pedal Position (BPP) switch electrical connector.
3. Loosen the (B) locknuts and turn the (A) BPP switch until it does not contact the brake pedal.
4. Tighten the BPP switch until it contacts the brake pedal and then turn it an additional 1/2 turn.
5. Check the brake pedal to floor height.
6. Tighten the lock nuts.