ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Starting and Charging|Battery > < Digital Transmission Range Sensor <--> [Neutral Safety Switch]|Locations|Page 4929
Page 1
background image

Digital Transmission Range Sensor: Service and Repair

REMOVAL

1. Raise and support the vehicle.

2. Disconnect the connector.

3. Remove the PNP switch and discard the gasket.

INSTALLATION

1. To install, reverse the removal procedure.

NOTE:  Use a new gasket to install the PNP switch.

Starting and Charging|Battery > < Digital Transmission Range Sensor <--> [Neutral Safety Switch]|Locations|Page 4929