ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Vibration While Idling|Page 4492 > < Engine - Vibration While Idling|Page 4490
Page 3
background image

NOTE

STEP 7 MODIFICATIONS ARE FOR VEHICLES BUILT PRIOR TO 07/15/02 ONLY.

7.

Modify the Belly Band on the two rear attaching Engine Mount # 1 holes by slotting the holes approximately 1/4" (6 mm) in a front to rear
direction. Use a Drill Bit (Figure 7).

8.

Loosen the center bolt on the # 1 (rear) lower Engine Mount (Figure 4).

9.

Loosen the center bolt on the # 2 (front) lower Engine Mount (Figure 4).

Engine - Vibration While Idling|Page 4492 > < Engine - Vibration While Idling|Page 4490