ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Engine - Vibration While Idling|Page 4477 > < Engine - Vibration While Idling
Page 2
background image

5.

Remove the rear lower cross-member (attached with four (4) bolts (Figure 1)).

6.

Remove the engine support cross-member that runs from front to rear of the engine (Belly Band). This can be accomplished by removing the front
two (2) attaching bolts, the rear two (2) attaching nuts and the four (4) Engine Mount # 1 and # 2 nuts (Figure 1).

NOTE

DISCARD THE TWO ENGINE MOUNT # 1 FLAT WASHERS FOR VEHICLES BUILT PRIOR TO 12/03/2001 ONLY.

Engine - Vibration While Idling|Page 4477 > < Engine - Vibration While Idling