ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Brakes - Clicking Noise Upon Application|Page 6343 > < Brakes - Clicking Noise Upon Application
Page 2
background image

4.

If the clearance is above 0.94 mm (0.037"):

a.

Remove caliper and inspect for missing guide plates on steering knuckle ears (Figure 2).

b.

If missing, install new guide plates, reassemble and re-measure. If the gap is above 0.7 mm (0.028"), go to Step 4c. If not, go to Step 5.

c.

If both guide plates are present, follow Step 5.

5.

If clearance is greater than 0.7 mm (0.028"):

a.

Remove caliper.

Brakes - Clicking Noise Upon Application|Page 6343 > < Brakes - Clicking Noise Upon Application