ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Customer Safety Information|Page 6449 > < Customer Safety Information
Page 1
background image

Brake Drum: Technician Safety Information

WARNING:

^ BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH HANDS

THOROUGHLY AFTER HANDLING.

^ IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15 MINUTES. GET MEDICAL ATTENTION

IF IRRITATION PERSISTS.

^ IF TAKEN INTERNALLY, DRINK WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY

WARNING: ASBESTOS HAZARDS

^ Some after market brakes contain asbestos fibers. Avoid breathing dust. Breathing asbestos dust may cause asbestosis and cancer.

Breathing asbestos dust is hazardous to your health.

^ Dust and dirt present on wheel brake and clutch assemblies may contain asbestos fibers that are health hazards when made airborne by

cleaning with compressed air or by dry brushing. Wheel brake assemblies and clutch facings should be cleaned using a vacuum cleaner
recommended for use with asbestos fibers such as Brake/Clutch/Service Vacuum 164-R3600.

^ Do not clean brake and clutch assemblies by dry brushing or with compressed air.
^ Dust and dirt from a vacuum should be disposed of in such a manner that prevent dust exposure, such as sealed bags. The bag must be

labeled as per Occupational Safety And Health Administration (OSHA) instructions and the trash hauler notified as to the bag's contents.

^ If a vacuum suitable for asbestos is not available, cleaning should be done wet. If dust generation is still possible, technicians should wear

government-approved toxic dust-purifying respirators.

^ Grinding or sanding on brake linings pads, rotors, drums or clutch facing's should be done only while using properly exhaust-ventilated

equipment. OSHA requires areas where asbestos dust generation is possible to be isolated and posted with warning signs. Only
technicians concerned with performing brake or clutch service should be present in the area

.

Customer Safety Information|Page 6449 > < Customer Safety Information