Escort L4-122 2.0L SOHC (1997)
or clutch repair should be present in the area.
8. Clean brake and clutch assemblies with a vacuum cleaner recommended for use with asbestos fibers.
9. Dispose of the vacuum dust and dirt in a sealed bag to prevent dust exposure. Label the bag per OSHA instructions and notify the trash hauler of
the bag's contents.
10. Remove the banjo bolt and discard the two copper washers.
11. Remove the two brake caliper bolts and the front disc brake caliper.
INSTALLATION
NOTE: Tighten caliper bolts to 39-43 Nm (29-36 ft.lbs).
NOTE: Use two new copper washers when installing banjo-bolt.
NOTE: Tighten banjo-bolt to 39-43 Nm (29-36 ft.lbs).
NOTE: Tighten the lug nuts in the specified sequence to 89-117 Nm (66-86.7 ft.lbs.)
1. To install, reverse the removal procedure.
2. Bleed serviced components.
3. Road test vehicle.