ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Combination Switch|Page 9661 > < Hazard Warning Switch|Diagrams|Page 9658
Page 1
background image

Hazard Warning Switch: Service and Repair
Combination Switch

REMOVAL

1. Disconnect the battery ground cable and wait one minute for the air bag backup power supply to be depleted.
2. Remove the steering wheel.

3. Remove the three screws and remove the upper and lower steering column shrouds.
4. Disconnect the hazard/flasher switch electrical connector, the two multi-function switch electrical connectors, and the two wiper/washer switch

electrical connectors.

5. Remove the (A) three screws and remove the (B) combination switch assembly.

Combination Switch|Page 9661 > < Hazard Warning Switch|Diagrams|Page 9658