ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Multiple Junction Connector > < Cooling Fan and/or Gauges - Erratic Operation
Page 1
background image

Grounding Point: All Technical Service Bulletins
Cooling Fan and/or Gauges - Erratic Operation

Article No.
96-17-11

08/12/96

^

COOLING FAN - ERRATIC OPERATION - 2.0L VEHICLES

^

GAUGES - ERRATIC READINGS - 2.0L VEHICLES

^

COOLING SYSTEM - ERRATIC OPERATION OF COOLING FAN - 2.0L VEHICLES

FORD: 
1997 ESCORT

LINCOLN-MERCURY: 
1997 TRACER

ISSUE: 
The gauges and/or cooling fan may experience irregular operation. This may be caused by high resistance at the ground attachment.

ACTION: 
Remove the ground screw and remove the paint underneath the ground screw attachment. This should reduce the possibility of high resistance. Refer to
the following Service Procedure for details.

SERVICE PROCEDURE

1.

Locate ground circuit # G146 in the engine compartment below the engine compartment fuse box on the body rail. The ground eyelet is bent at a
90 degree angle and its location is identified in the 1997 Escort/Tracer Electrical/Vacuum Troubleshooting Manual (EVTM), Page 151-1,
Location/Zone D10.

2.

Remove the ground screw.

3.

Remove some of the paint at the point where the eyelet contacts the sheet metal.

4.

Reinstall the ground eyelet and the screw.

OTHER APPLICABLE ARTICLES: NONE 

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION

DESCRIPTION

TIME

961711A

Repair Ground Contact

0.3 Hr.

DEALER CODING

CONDITION

BASIC PART NO.

CODE

14289

93

OASIS CODES: 203000, 203200, 204000, 206000, 208200, 402000

Multiple Junction Connector > < Cooling Fan and/or Gauges - Erratic Operation