Escort L4-122 2.0L SOHC (1997)
Seat Belt: Service and Repair
Cleaning and Inspection
CAUTION:
-
Using other than recommended cleaners or procedures may adversely affect fabric flammability, appearance and durability.
-
Avoid bleaching or redying the belt webbing as it could hinder the safety belt strength and performance.
1. Remove excess stain from fabric by scraping or wiping with a clean cloth.
NOTE: To maintain a uniform appearance of the material in the event of severe soil and stain, the entire insert may have to be cleaned to prevent
a "ring" condition.
2. Apply Extra Strength Upholstery Cleaner E8AZ-19523-AA or equivalent as directed in the label instructions.
CAUTION:
-
Test all cleaners in a small hidden area of fabric prior to use. Do not use if fabric color or texture is adversely affected by a particular cleaner.
-
During application of the cleaner, avoid contact with vinyl trim.
3. Allow the cleaner to dry completely, forming a white powder on the surface of the fabric.
4. Brush and vacuum the white powder from the surface of the fabric.
5. If the stain is still visible, blot the area with a clean cotton cloth saturated with Spot and Stain Remover F3AZ-19521-WA or equivalent.
6. Rub in a circular motion continuously exposing clean portion of the cloth.
7. Gradually widen cleaned area to edges.
8. If the stain is still visible, repeat steps 6-8.
