Escort L4-122 2.0L SOHC (1997)
10. Remove the roof side inner rear moulding.
11. Remove both roof side rear trim covers.
12. Remove the three bolts and the quarter trim panel bracket.
13. Remove the rear safety belt retractor bolts.
INSTALLATION
To install, reverse the removal procedure and torque to specification.
NOTE:
-
Make sure the safety belt webbing is not twisted prior to installation.
-
Ensure that the plastic bezel located on the rear package tray is secure after installing the rear safety belt and that the rear safety belt does not bind
or catch on it.
-
Ensure that after the rear safety belt retractor is installed, the retractor is not stuck in the Automatic Locking Retractor (ALR) mode.
-
Perform the Function Test Procedure to ensure that the new retractor operates properly.
