Escort L4-122 2.0L SOHC (1997)
WARNING: TO PREVENT GLASS SPLINTERS FROM ENTERING EYES OR CUTTING HANDS, WEAR SAFETY GLASSES AND
HEAVY GLOVES WHEN CUTTING GLASS FROM THE VEHICLE.
NOTE: Lubricate the urethane sealant where it meets the glass with EC7784 lubricant or equivalent (10:1 ratio of water to soap) to aid Interior
Auto Glass Cut-Out Knife Kit 164-R2450 when cutting the urethane sealant.
6. Insert inflatable pump bag at the top of the windshield glass. Gently push the windshield glass outward from the inside of the vehicle to ensure the
urethane sealant seal is broken.
7. Use a razor blade knife to cut any remaining urethane that is still holding the windshield glass and remove the windshield glass.
8. Trim the remaining urethane on the pinch weld to the specified thickness.
-
Apply Urethane Metal Primer (part of E0AZ-19562-A) or equivalent meeting Ford specification WSB-M2G234-C to any exposed metal on
the pinch weld. Allow 10 minutes drying time.
-
Add Urethane Sealant (part of E0AZ-19562-A) or equivalent meeting Ford specification WSB-M2G316-B to bring the remaining urethane
sealant to the specified thickness.
-
If reusing the windshield glass, clean off all of the old urethane sealant with an alcohol-free glass cleaner.
INSTALLATION
