Escort L4-122 2.0L SOHC VIN P SFI (1999)
3. Remove the copper washers and discard.
4. Remove the brake caliper bolts and the front disc brake caliper.
Installation
1. CAUTION: Do no use denatured alcohol for flushing the brake system or cleaning assemblies where alcohol could be trapped. If
denatured alcohol is trapped, it can cause eventual failure of rubber components in the system.
CAUTION: Never allow any petroleum product or mineral oil to contact the inside of a brake hydraulic system. Mineral oil and
petroleum products deteriorate the natural rubber seals used in brake hydraulic system. If a brake system becomes contaminated, it must
be flushed with clean brake fluid and all rubber seals and flex hoses replaced. Use High Performance DOT 3 Brake Fluid
C6AZ-19542-AB or equivalent meeting Ford specification ESA-M6C25-A, DOT 3.
NOTE: Replace the two copper washers on the brake hose.
