Escort L4-122 2.0L SOHC VIN P SFI (1999)
Master Cylinder. Bleeding. In Vehicle
3. Fill the brake master cylinder reservoir with High Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent meeting Ford specification
ESA-M6C25-A, DOT 3.
4. Have an assistant pump the brake pedal until clear, bubble-free brake fluid flows from both brake hoses.
5. Remove the short brake hoses and install the brake outlet lines.
Disassembly and Assembly
Disassembly
WARNING: Brake fluid contains polyglycol ethers and polyglycols. Avoid contact with eyes. Wash hands thoroughly after handling. If
brake fluid contacts eyes, flush eyes with running water for 15 minutes. Get medical attention if irritation persists. If taken internally, drink
water and induce vomiting. Get medical attention immediately.
1. NOTE: ABS master cylinder shown, non-ABS similar.
Remove the brake master cylinder.
2. Clean the outside of the brake master cylinder.
3. Support the brake master cylinder body in a vice.
