Escort L4-122 2.0L SOHC VIN P SFI (1999)
12. Remove the nuts.
13. Lower the vehicle.
14. Remove the nuts and remove the intake manifold, Discard the gasket.
Installation
1. CAUTION: Do not use abrasive grinding discs to remove the gasket material; use only manual scrapers. Do not scratch or gouge
aluminum sealing surfaces.
Clean and inspect the mounting faces of both the intake manifold and the cylinder head. Both surfaces must be clean and flat.
2. Clean and oil the manifold studs.
3. Install the gasket and the intake manifold. Hand-tighten the nuts.
4. Raise and support the vehicle.